DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
53
Dallmeier electronic
q Intersection
If you have activated Intersection in the draw mode, only those
rectangles are displayed that are linked correspondingly with
the marking drawn by you, depending on the search method
(see Search mode).
If you have not activated Intersection, all the rectangles are
displayed.
Search Mode
The selection in the Search Mode eld are theoretically used
to specify the search method and thus the number of relevant
events.
q Balance Point Search
The rectangles that mark a gure change have an imaginary
geometric balance point assigned.
Fig. 8-11: Rectangle activated
Fig. 8-12: Rectangle not activated
Fig. 8-13: Intersection activated Fig. 8-14: Intersection not activated
To Next Page
Loading...