When you want to change the store's opening times (day/night
settings)
7. This is where you change the times
The times are used for alarm routing and day/night signals to
the controllers.
The hour setting and minute setting is entered using the arrow
keys.
To the end user
This function is an option, but is only relevant if
controllers or functions have been installed that
can receive the signals in question.
Or if external alarm destinations have been cre-
ated, for which alarms are sent to different places
depending on whether it is a day or night period.
To the installer
Please put a cross in the box if the day/night func-
tion is used.
Yes
No
1. Press the Menu button
2. Select the "Plant control" line
3. Press "Enter"
4. Select "Day night setup"
5. Press "Enter"
6. Press the "right arrow"
Page 1
Page 2
To Next Page
Loading...
Need help?
General
