When you want to change the defrost times
9. This is where you change the times
The defrost cycle will start at the set times.
The hour setting and minute setting is entered using the arrow
keys.
The time point 00.00 will not start a defrost.
10. Repeat procedure for any other defrost groups.
To the end user
This function is an option, but is only relevant if
controllers or functions have been installed that
can receive the defrost signal.
To the installer
Please put a cross in the box if the defrost function
is used.
Yes
No
1. Press the Menu button
2. Select the "Plant control" line
3. Press "Enter"
4. Select defrost group
5. Press Enter
6. Select one of the defined defrost groups
7. Press "Enter"
Page 1
page 2
8.Press the "right arrow"
To Next Page
Loading...
Need help?
General
