Alarm setup
Alarm common settings
This is where you enter the general settings for:
• Alarm routes
• Modem
• "i'm alive alarm"
Alarm routes
This is where you set the number of alarm routes to be created.
An alarm route describes what will be done when an alarm is
generated with a given priority at a given time.
(The route is set later on.)
Modem baudrate
The baudrate setting can be changed if this is necessary.
The settings "9600" and "19200" are available in addition to the
settings shown.
Default = "38400".
Once one or more alarm routes have been
created, this enables settings for them to be
set. The settings can be seen on the next page.
Modem initialising string
The factory-set initialising string should only be changed in spe-
cial circumstances.
Automatic cancellation of alarms
Select which alarms are to be auto-acknowledged. (These will be
shown in the list of active alarms and they will also be entered
under alarm history.)
To Next Page
Loading...
Need help?
General
