Danfoss VLT AutomationDrive User Manual

5.5 Parameter Menu Structure
Establishing the correct programming for applications often
requires setting functions in several related parameters.
These parameter settings provide the frequency converter
with system details for the frequency converter to operate
properly. System details may include such things as input
and output signal types, programming terminals, minimum
and maximum signal ranges, custom displays, automatic
restart, and other features.
•
See the LCP display to view detailed parameter
programming and setting options.
•
Press [Info] in any menu location to view additional
details for that function.
•
Press and hold [Main Menu] to enter a parameter
number for direct access to that parameter.
•
Details for common application set ups are
provided in 6 Application Set-Up Examples.
About Frequency Converter P...
VLT
®
AutomationDrive Operating
Instructions
MG.33.AJ.02 - VLT
®
is a registered Danfoss trademark 35
5
5

Danfoss VLT AutomationDrive Specifications

General

Supply Voltage	3 x 200-240 V ±10% 3 x 380-500 V ±10% 3 x 525-600 V ±10%
Enclosure	IP20
Output Power Range	0.25 kW - 1.5 MW
Communication Protocols	Modbus RTU
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short circuit, Ground fault, Motor overload
Ambient Temperature Range	-10°C to +50°C (14°F to 122°F)