Danfoss VLT FC 100 Design Guide

9.1.2 Encoder Direction 233
9.1.3 Closed Loop Drive System 233
9.1.4 Programming of Torque Limit and Stop 233
10 Options and Accessories
235
10.1.1 Mounting of Option Modules in
Slot A 235
10.1.2 Mounting of Option Modules in
Slot B 235
10.1.3 Mounting of Options in Slot C 236
10.2 General Purpose Input Output Module MCB 101
236
10.2.1 Galvanic Isolation in the MCB 101 236
10.2.2 Digital Inputs - Terminal X30/1-4: 238
10.2.3 Analog Inputs - Terminal X30/11, 12: 238
10.2.4 Digital Outputs - Terminal X30/6, 7: 238
10.2.5 Analog Output - Terminal X30/8: 238
10.3 Encoder Option MCB 102
239
10.4 Resolver Option MCB 103
240
10.5 Relay Option MCB 105
241
10.6 24V Back-Up Option MCB 107
243
10.7 MCB 112 PTC Thermistor Card
244
10.8 MCB 113 Extended Relay Card
246
10.9 Brake Resistors
247
10.10 LCP Panel Mounting Kit
247
10.11 IP21/IP 4X/ TYPE 1 Enclosure Kit
248
10.12 Mounting Bracket for Frame Size A5, B1, B2, C1 and C2
251
10.13 Sine-wave Filters
253
10.14 High Power Options
253
10.14.1 Frame Size F Options 253
11 RS-485 Installation and Set-up
255
11.1 Overview
255
11.2 Network Connection
255
11.3 Bus Termination
255
11.4.1 EMC Precautions 256
11.5 Network Configuration
256
11.5.1 FC 300 Frequency Converter Set-up 256
11.6 FC Protocol Message Framing Structure - FC 300
257
11.6.1 Content of a Character (byte) 257
11.6.2 Telegram Structure 257
11.6.3 Length (LGE) 257
11.6.4 Frequency Converter Address (ADR) 257
Contents FC 300 Design Guide
MG.33.BD.02 - VLT
®
is a registered Danfoss trademark 5

Danfoss VLT FC 100 Specifications

General

Brand	Danfoss
Model	VLT FC 100
Category	DC Drives
Language	English