Dascom 5130P - Page 113

Tally Dascom 5130P
99
Command Function
ESC 7 Enable Upper Control Codes
ESC : Copy ROM to RAM
ESC < Select Unidirectional Mode 1 Line
ESC = Set MSB to 0
ESC > Set MSB to 1
ESC ? Reassign Graphics Mode
ESC @ Initialize Printer
ESC A Set n/60” Line Spacing
ESC B Set Vertical Tabs
ESC C Set Page Length in Lines
ESC C 0 Set Page Length in Inches
ESC D Set horizontal tabs
ESC E Select Emphasized Mode
ESC F Cancel Emphasized Mode
ESC G Select Double-strike Mode
ESC H Cancel Double-strike Mode
ESC J Advance print position
ESC K Select 60-dpi graphics
ESC L Select 120-dpi graphics
ESC M Select 12 cpi
ESC N Set bottom margin
ESC O Cancel bottom margin
ESC P Select 10 cpi
ESC Q Set right margin
ESC R Select an international character set and code page
ESC S Select Subscript or Superscript Printing
ESC T Cancel Subscript or Superscript Printing
ESC U Turn unidirectional mode on/off
ESC W Turn Double-wide Mode On/Off
ESC Y Select 120-dpi, double-speed graphics
ESC Z Select 240-dpi graphics
ESC \ Set relative horizontal print position
ESC c Set horizontal motion index(HMI)
ESC g Select 15 cpi
ESC k Select Typestyle Family
ESC l Set left margin
ESC p Turn Proportional Mode On/Off
ESC q Select Character Style
ESC t Select character table
ESC w Turn Double-high Mode On/Off
ESC x Select Letter Quality or Draft
ESC y Select draft/super draft
ESC Y Select High-speed Double-density Graphics Mode
DEL Delete Character