Dascom 5130P - Common Setup

Tally Dascom 5130P
33
The following section introduces and explains all the possible menu settings. The default setting is marked
by an asterisk (*).
4.6.1 Common Setup
Parameter
group
Parameter Possible
settings
Description
Language English *
Deutsch
Россия
Italiano
Français
Español
Türkçe
Selects the menu language.
Change
Menu
Menu1 *
Menu2
Defines if the parameter settings of Menu1 or of Menu2 are
changed.
Default
Set
Off *
All
Menu1
Menu2
Sets all parameters to the default settings.
Menu1 sets all parameters of Menu1 to the default settings.
Menu2 sets all parameters of Menu2 to the default settings.
Copy
Menu
Menu1 to
Menu2 *
Menu2 to
Menu1
Copies the settings of Menu1 to Menu2 and vice versa.
Share
User
Auto *
Manual
(1)
Selects the method to share this printer with multiple users.
Auto: Printer handles print jobs for USER1 and USER2
automatically.
Manual: After receiving a print job for USER1 or USER2 the
respective USER1 or USER2 key must be pressed to start the
printout.
Note: This parameter is invalid for continuous forms (optional
tractor feed handling).
Common
Setup
Time to
Idle
1s *
10s
30s
60s
Selects the time in seconds to return to idle state after
completion of all jobs and ejecting paper in order to change to
another user in case of Auto mode.
Note: This parameter is only valid if under Share User the
setting “Auto” has been selected.
(1)
Invalid in Olivetti emulation.