Dascom 5130P - Calibrations; Print Alignment

Tally Dascom 5130P
41
5 Calibrations
With the cover open, hold 【USER1】+【OFFLINE】+【USER2】 while powering on the printer. It beeps
once after implementing the paper detection action, while LED”DATA” blinks and other LEDs light up, to
indicate the activation of Calibrations mode.
Note:
Calibrations can be implemented easily with Configuration Tool which comes on the CD-ROM enclosed
with the printer.
Calibrations provide the following functions:
z Print Alignment
z Setting TOF
z Setting Left margin
z Setting Tear-off position (for continuous forms only)