Dascom 5130P - Specification

Tally Dascom 5130P
49
7 Specification
7.1 Printer specification
Print System Mono-chrome serial impact dot matrix
Print
Technology
Uni-/bi-directional logic seeking for text and graphics (software selectable)
Print Speed
Pitch HS Draft Draft LQ
10 CPI
(1)
400 CPS*
(2)
300 CPS 100 CPS
12 CPI 360 CPS 360 CPS 120 CPS
15 CPI 450 CPS 450 CPS 150 CPS
16.6 CPI 250 CPS 250 CPS 167 CPS
17.1 CPI 513 CPS 513 CPS 171 CPS
20 CPI 600 CPS 600 CPS 200 CPS
24 CPI 360 CPS 360 CPS 360 CPS
(*Available for max. 8.4inches
(3)
width media, single ply and bankbook only. At least
0.5inch width must be left for both sides of the paper loader.)
Font Matrix
Pitch HS Draft Draft LQ
10 CPI 8x8/80H 12x24/120H 36x24/360H
12 CPI 10x24/120H 10x24/120H 30x24/360H
15 CPI 8x16/120H 8x16/120H 24x16/360H
16.6 CPI 12x24/240H 12x24/240H 36x24/360H
17.1 CPI 7x24/120H 7x24/120H 36x24/360H
20 CPI* 6x24/120H 6x24/120H 30x24/360H
24 CPI* 10x24/240H 10x24/240H 10x24/240H
Proportional Nx24/360H Nx24/360H Nx24/360H
(Matrix/DPI
(4)
)
(* Not available for Olivetti emulation.)
Graphics
H. 1/60, 1/72, 1/80, 1/90, 1/120, 1/180,1/216, 1/360
V. 1/180, 1/360
Print Head
Number of pins: 24 pins/ 12x2 column
Firing frequency: Normal mode: 1800 Hz
Diameter of pin: 0.25 mm
Life: 400 million strokes/pin
Paper Feed
Speed
Friction feed: 15ips
(inches per second)
Continuous feed (optional): 5ips
(inches per second)
Line feed: 40ms/line (at 6lpi)
Printable
Columns
Friction: Tractor: (optional)
10 CPI: 94 CPL
(5)
10 CPI: 82 CPL
12 CPI: 112 CPL 12 CPI: 98 CPL
15 CPI: 141 CPL 15 CPI: 123 CPL
16.6 CPI: 156 CPL 16.6 CPI: 136 CPL
17.1 CPI: 161 CPL 17.1 CPI: 140 CPL
20 CPI: 188 CPL 20 CPI: 164 CPL
24 CPI: 225 CPL 24 CPI: 196 CPL