Tally Dascom 5130P
98
9 Control codes summary
9.1 Epson ESC/P2 emulation command list
Command Function
BEL Beeper
BS Backspace
HT Horizontal Tab
LF Line Feed
VT Vertical Tab
FF Form Feed
CR Carriage Return
SO Double-Wide Printing 1 Line
SI Select Condensed Mode
DC2 Cancel Condensed Mode
DC4 Cancel Double-Wide Printing 1 Line
CAN Cancel Line
ESC SO Double-Wide Printing 1 Line
ESC SI Select Condensed Mode
ESC SP Set Inter Character Space
ESC ! Master Select
ESC # Cancel MSB Control
ESC $ Set absolute horizontal print position
ESC % Select user-defined set
ESC & Define user-defined characters
ESC ( - Select line/score
ESC ( B Bar code setup and print
ESC ( C Set page length in define unit
ESC ( G Select graphics mode
ESC ( U Set unit
ESC ( V Set absolute vertical print position
ESC ( ^ Print data as characters
ESC ( c Set page format
ESC ( t Assign character table
ESC ( v Set relative vertical print position
ESC * Select bit image
ESC + Select n/360” Line Spacing
ESC - Auto Underscore
ESC . Print raster graphics
ESC 0 Select 1/8” Line Spacing
ESC 2 Select 1/6” Line Spacing
ESC 3 Set Graphics Line Spacing (n/180”)
ESC 4 Select Italic Mode
ESC 5 Cancel Italic Mode
ESC 6 Enable Printable Characters
To Next Page
Loading...
