Tally Dascom 5130P
35
4.6.3 Page Setup
Parameter
group
Parameter Possible
settings
Description
Line
Space
(1)
1/6” *
1/3”
1/4”
1/5”
1/7”
1/8”
Sets the line density in lines per inch.
1/6=6 lines per inch
1/3=3 lines per inch
1/4=4 lines per inch
1/5=5 lines per inch
1/7=7 lines per inch
1/8=8 lines per inch
Form
Length
(1)
3”
3.5”
11/3”
4”
4.5”
5”
5.5”
6”
7”
8”
8.5”
11” *
A4
12”
14”
17”
Sets the form length either via inches or the standard format A4.
Please note that the adjustment in lines depends on the selected
line space (see above).
Top Margin
(0~60/60")
0"
l
10/60" *
l
60/60"
Sets the position of the first printing line. The factory setting for
the first printing position is 10/60"(4.23mm). This is equivalent to
the second line from the top.
Bottom
Margin
(0~30/60")
(1)
0"
l
10/60" *
l
30/60"
Sets the distance between last printing line and bottom edge.
Line Width 80
90
94 *
Sets the line length; unit is number of characters at a character
density of 10 cpi.
If 80 is chosen in Olivetti emulation, 90 is used for the line length
instead of 80.
Note: This parameter is invalid for continuous forms (optional
tractor feed handling), with default setting “80”.
Left Margin
(0~90/90")
0" *
l
90/90"
Sets the left margin; unit is n/90 inch.
Page
Setup
Reference
Edge
Left *
Right
Sets the horizontal leading edge.
Left: the left edge of the character matrix is aligned to the left
To Next Page
Loading...
