Datalogic Magellan 3300HSi Product Guide

LED and Beeper Indicators
Product Reference Guide 7
LED and Beeper Indicators — cont.
Table 2. Beeper Functions
BEEPER
INDICATION
INDICATION COMMENT
Power On Beep Single beep The Power-On Beep indication is a configurable feature which can
be enabled or disabled. When enabled, this beep Indicates the
scanner has finished all its power up tests and is now ready for
operation.
Good Read
Indication
Single beep The good read beep indication is configurable. Options include:
Enable/disable, frequency, duration and volume. See the Product
Reference Guide (PRG) for more information.
Diagnostics Varies (see
Error Codes on page 4
for more information)
The Beeper can provide diagnostic feedback if the scanner discov-
ers a problem during SelfTest.
Programming
Mode
Indications
Varies depending upon the feature(s)
being configured.
The Beeper will sound as programming bar code labels are
scanned, indicating progress during scanner configuration.

Datalogic Magellan 3300HSi Specifications

General

Scanner type	1D
Decoding standards	GS1, MicroPDF417, PDF417
Optical sensor resolution	1280 pixels
Light levels (direct sunlight)	0 - 86100 lx
Dimensions (WxDxH)	152 x 87 x 152 mm
Power consumption (active)	9.9 W
Standard interfaces	USB, RS-232
Input voltage	90 - 264 V
Power requirements	47 - 63 Hz
Power consumption (standby)	2 W
Certification	RoHS, EN 60825-1, IEC 60825, IEC 60825-1
Product color	Stainless steel
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Weight	790 g