Product Reference Guide
89
Chapter 6
Symbologies
The scanner supports the following symbologies (bar code types). Options for each symbology
are included in this chapter.
Factory Defaults—
for the standard RS-232 interface are indicated in bold text throughout this
section. Reference
Appendix D, Factory Default Settings for default exceptions for your interface.
UPC-A
Disable/Enable UPC-A
When disabled, the scanner will not read UPC-A bar codes.
• UPC-A • Code 39
• UPC-E
• Code 32 Italian
Pharmacode
• EAN-13 • Code 128
• EAN-8 • Interleaved 2 of 5
• GS1 DataBar Omnidirectional /
Stacked Omnidirectional
• Codabar
• GS1 DataBar Expanded /
Expanded Stacked
• Code 93
• GS1 DataBar Limited
START / END
PROGRAMMING bar codes
Disable UPC-A
Enable UPC-A
DEFAULT
To Next Page
Loading...
