Datalogic Magellan 3300HSi

188 Magellan
TM
3300HSi
By Autorun.dls file
1. Generate a text file by any text editor as follows and save it as autorun.dls
$START$
DUMPSTATS,dmpstats.txt
$END$
2. Save or copy the autorun.dls file to the microSD card
3. Insert the micro SD card into the scanner
4. Wait for about 3 seconds.
A scanner statistics file named dmpstats.txt is saved to the microSD card.
From microSD Card to Scanner
Application code load to scanner
By Autorun.dls file
1. Generate a text file by any text editor as follows and save it as autorun.dls
$START$
LOADSW,R96-app1.bin
$END$
2. Step 2: Save or copy file autorun.dls to microSD card and copy the application code (example R96-
app1.bin) to the micro SD card.
3. Insert the micro SD card into the scanner.
4. Upon scanner audio indication of completion, the application code R96-app1.bin is loaded to the scanner.
Typically, this takes about 45 seconds.
CPLD code load to the scanner
By Autorun.dls file
1. Generate a text file using any text editor as follows, and save it as autorun.dls
$START$
LOADHW,090A.vme
$END$
2. Save or copy the autorun.dls file and copy the CPLD code (example 090A.vme) to the micro SD card.
3. Insert the micro SD card into the scanner
4. Upon scanner audio indication of completion, CPLD code 090A.vme is loaded to the scanner.