Datalogic Magellan 3300HSi

14 Magellan
TM
3300HSi
Code 128 / EAN128
• Prefix must be either ASCII characters ']C0', ']C1' or ']C2'.
• Label length excluding prefix character must meet requirements imposed by the main scanner's fixed or vari-
able label length control for this symbology type.
• If EAN-128 Symbology is Enabled
and prefix is ']C1', label will be identified as an EAN128 otherwise it is
identified as a Code 128.
• A prefix of ']C0' designates that no function code is present in the 1st or 2nd character position.
• A prefix of ']C2' designates that a function code 1 is present in the 2nd character.
• Example : ']C0Code_128.Test'.
PDF417
• Prefix must be an ASCII characters ']L0'.
• Label length excluding prefix character cannot exceed 300 characters. In addition to this, label length exclud-
ing prefix character must meet requirements imposed by the main scanner’s fixed or variable label length con-
trol for this symbology type.
• Example : ']L0pdf_test_label'.
“Unknown” AIM ID (an AIM ID which is not specified above)
If a label is received that does not have an AIM ID as specified above, and the first three label characters qualify as
follows...
• The first character is a ‘]’
• The second character is a capital or small letter
• The third character is a digit
...then the label type is set to GENERIC_DATA and the “unknown” AIM ID is left-appended to the beginning of
the label data.