Datalogic Magellan 3300HSi Product Guide

Image Capture
Product Reference Guide 33
Image Capture to a microSD Card by Optional Remote Camera Button Press
Ensure a Remote Camera Button is connected to the auxiliary port, then insert a microSD card
into the scanner.
• Press and release the Remote Camera Button.
• Place an item to be captured in front of the scanner.
• Press and release the Remote Camera Button again. An image named bimgxxxx.jpg will be
written to the microSD card.
Format, size, contrast, brightness and compression use the configured values.
The image filename is automatically incremented from bimg0000 to bimg9999. The date image
file generated is not actual, since no real time clock is embedded in the scanner.
NOTE
This feature is only available if the Camera Button is configured as image cap-
ture, optional Remote Camera Button and a microSD card is inserted.

Datalogic Magellan 3300HSi Specifications

General

Scanner type	1D
Decoding standards	GS1, MicroPDF417, PDF417
Optical sensor resolution	1280 pixels
Light levels (direct sunlight)	0 - 86100 lx
Dimensions (WxDxH)	152 x 87 x 152 mm
Power consumption (active)	9.9 W
Standard interfaces	USB, RS-232
Input voltage	90 - 264 V
Power requirements	47 - 63 Hz
Power consumption (standby)	2 W
Certification	RoHS, EN 60825-1, IEC 60825, IEC 60825-1
Product color	Stainless steel
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Weight	790 g