1-2 Magellan
®
9500
Chapter 6, Programming, details procedures and provides custom bar-
codes for setting programmable scanner and scanner/scale features. This
chapter is organized by the categories: General Features, Interface Related
Features and Symbology Related Features.
Appendix A, LED/Beeper Indications & Controls, lists the various functions
and indications of the scanner/scale control panel features.
Appendix B, Cable Information, outlines wire requirements, connector
specifications and pinout details for associated product cabling.
Appendix C, Keypad, furnishes bar codes representing the digits and char-
acters required to enter extended programming data needed during certain
programming sessions.
Appendix D, Host Commands, contains a partial listing of available host
commands that can be used with a compatible host interface.
Appendix E, Factory Defaults, is a table providing factory default pro-
grammable settings for common interfaces.
Appendix F, Handheld Data Format Requirements, provides application
notes describing the general format of data accepted by the scanner
through the auxilliary port as transmitted from a handheld scanner.
How to Use This Manual
You’ll find it helpful to familiarize yourself with the first chapter of this
manual, since it provides both a general description of the product’s fea-
tures and an overview of the manual’s contents and organization. Refer-
ence the other chapters as required for information about scanner or
scanner/scale installation, operation, maintenance, calibration and bar
code programming.
To Next Page
Loading...
Need help?
General
