Codabar Enable
Product Reference Guide 6-235
Codabar Start Stop Character Set
This feature selects the format of transmitted Codabar start/stop charac-
ters.
Options are:
•ABCD/TN* E
•ABCD/ABCD
• abcd/tn* e
•abcd/abcd
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code below or from the following page representing the
desired option. You’ll need to cover any unused bar codes and facing
pages to ensure that the scanner reads only the bar code you intend
to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
CODABAR START STOP CHARACTER = ABCD/TN* E
CODABAR START STOP CHARACTER = ABCD/ABCD
To Next Page
Loading...
