EasyManuals Logo

Datalogic PowerScan M8300 User Manual

Datalogic PowerScan M8300
245 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #152 background imageLoading...
Page #152 background image
Enter Configuration
Exit and Save Configuration
Ì$+;Î
16-KEY DK MODEL PARAMETERS
Ì$-?Î
143
FUNCTION KEY LABEL
This item allows the user to change the default mnemonic label associated to each individual
function key (F1 F4). This is done by programming a short acronym string or symbol to be
shown in the bottom of the display. The purpose of the label is to serve as an indication of the
programmed function of the Function Key below it. To program the Function Keys themselves,
see the “Function Key Programming” command on page 141.
NOTE: Function key label length is fixed at 4 characters and is not programmable.
define function key label
Read the above code.
Specify which Function Key Label you want to change by scanning a barcode (1-4) from the
hex numeric table in the back of this manual.
Define the label string by scanning 4 characters from the Hex numeric table.
Example
: To define Function Key 2 label = D
Define function key
label
Function
key #
Hex codes
Text string
Read
+
2
+
20 + 20 + 44 + 20
=
space space D space
LOWER CASE
This function enables/disables the capability to use the SHIFT key to switch to Lower Case
(alphanumeric) mode. When enabled, the indication in the upper right corner of display is ‘ab’.
Disable Lower Case
Enable Lower Case

Table of Contents

Other manuals for Datalogic PowerScan M8300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datalogic PowerScan M8300 and is the answer not in the manual?

Datalogic PowerScan M8300 Specifications

General IconGeneral
Scanner type1D
Maximum range30 m
Read rate (max)40 reads/s
Yaw reading angle-60 - 60 °
Decoding standardsGS1 DataBar, Code 16K, Code 49, GS1 DataBar Expanded Stacked, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional
Tilt reading angle-20 - 20 °
Pitch reading angle-55 - 55 °
Operating time240 min
Dimensions (WxDxH)114 x 69 x 210 mm
BluetoothNo
Operating frequency910 MHz
Input voltage10 - 30 V
Battery capacity2150 mAh
Power requirements0.33 - 1A
Number of reads per charge60000
CertificationIP64, China RoHS, EU RoHS, CDRH Class II, IEC 60825-1 Class 2
Keys quantity3 keys
Product colorBlack, Yellow
LED indicatorsCharging, Power
Display resolution32 x 96 pixels
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)-20 - 50 °C
Operating relative humidity (H-H)0 - 90 %
Weight and Dimensions IconWeight and Dimensions
Weight393 g

Related product manuals