Datavideo TVS-2000A - RMC-280 Remote Controller

12
2.5 RMC-280 Remote Controller
The RMC-280 is a cost effective remote controller designed specifically for the TVS-2000A
Virtual Studio System. The RMC-280 interfaces with the TVS-2000A Virtual Studio System via
an RS-232 interface. The RMC-280 gives the user switcher-style control of the TVS-2000A
Virtual Studio System. There are several effects that the user can also control on the RMC-280,
such as downstream keyers (DSK) and transition effects. In addition, the T-Bar gives the user
the convenience to perform transitions between Preview (PVW) and Program (PGM).
The RMC-280 has also been equipped with 10 function keys, which provide the user with the
flexibility of manually assigning functions related to audio features, downstream keyer, delay,
media player functions and output effects to the 10 keys.
The features are summarized as follows:
• A switcher style keyboard for direct TVS-2000A operation
• Clear key definitions
• Ten user-defined function keys, F1 to F10 and each of these function keys can be:
Audio
DSK
General
Media
Output
V/C
Capture: Mute
Capture: Volume
Input: Mute
Input: Solo
Input: Volume
Output: Mute
Output: Volume
Streaming: Mute
Streaming: Volume
Set Position
Set Preview
Set Rotation
Set Scale
Set Source
Transition Cut
Transition
Fade
Delay
Auto Play
Loop Play
Pause
Play
Select
Stop
Select Preview
Select Program
Transition Cross-
Dissolve
Transition Fade
to Black
Transition Take
Studio: Load
Studio: Select Camera
Studio: Set Bus A Source
Studio: Set Bus B Source
Studio: Set Bus C Source
• Program/Preset Rows with buttons allowing the user to switch between CAM 1, CAM 2,
AUX, V/C 1, V/C 2, V/C 3, V/C 4, Media 1, Media 2, Still 1 and Still 2
• Ten custom-set phase buttons for virtual camera lens zoom in/out
• Linear and Curved buttons for respective camera movements.
• T-Bar can be operated in one way or two way mode
• TAKE button to switch between PVW and PGM views
• FTB button fades the PGM view to a black screen
• CROSS DISSOLVE button applies cross-dissolve transition effect to switching between PGM
and PVW views
• Two downstream keyers (DSK) with two corresponding knobs for assignment of DSK
sources
• CUT and AUTO TRANS buttons transition DSKs between PGM and PVW views
• STM button starts live video program streaming
• Capture function (CAP Button) records the live video program
• Still Grab function (GRAB Button) captures the instantaneous video image
• RS-232 interface for communication between RMC-280 and TVS-2000A
• 12V DC input making the unit ideal for studio applications
• Bright LED lighting