Virtual Camera Customization Tool
There are three control modes for moving the virtual camera. Each
control mode is described in the table below.
All direction Sets x and y coordinates of the virtual camera
Rotation Rotates the virtual camera in all directions and angles
Zoom Zooms IN/OUT virtual camera
“Lock Axis” Mode
The axis lock function prevents the user from moving the virtual
camera position by accident. You can lock the x, y and z axes
individually by clicking the respective axis button; you can also lock all the axes simultaneously.
View of the Scene
The camera and the viewing angle are
configurable. The user is allowed to select up to
15 cameras. The angle of view can be previewed
in the scene window. In addition, the user is
allowed to select left, right, top, bottom, front
and rear views.
To Next Page
Loading...
