Select air-to-surface mode by pressing the [7] key.
Step 3
Place the CCRP pipper on the intended target and press and hold the weapon release button on your
joystick or the [Space] key on your keyboard. The WCS will initiate the release point calculation, and
on the HUD will appear a diamond symbol that represents the designation point. In the upper
portion of the HUD, a steering ring will be displayed. Fly the aircraft such that the aircraft symbol
"tail" is placed in the center of this ring. The range scale on the right side of the HUD turns into a
time-to-release scale that is graduated in seconds. The arrow indicating time-to-release will appear
on the scale only 10 seconds before the bombs release. For accurate bombing it is best to minimize
changes in bank and yaw. When the timer reaches zero, the bomb(s) will automatically be released
and you can release the trigger.
Unguided Rockets and Internal Gun
Unguided rockets include all the rockets and missiles that are not equipped with guidance system.
These include the S-8 in the B-8 rocket launcher, the S-13 in the UB-13 rocket launcher, and the S-
25. The internal gun is the GSh-301 30-mm gun with 150 rounds.
Step 1
Identify the target visually.
Step 2
Select air-to-surface mode by pressing the [7] key and cycle the [D] key until the rocket of choice is
selected. Or, select the [C] to make the gun the active weapon. Confirm that the correct weapon is
selected on the HUD. Maneuver into a shallow dive towards the target.
Step 3
When the aiming pipper is over the target and launch conditions are satisfied, the "ПР" (LA)
message will appear on the HUD. Fire the rocket(s) or guns by pressing the weapon release button
on your joystick or by pressing the [Space] key on your keyboard.
UNGUIDED ROCKETS CAN BE LAUNCHED ONCE THE "LA" MESSAGE APPEARS ON THE HUD. BEFORE FIRING
THOUGH, ASSUME A SHALLOW BANK WITH MINIMAL BANK, PITCH, AND YAW DEVIATIONS. SUCH DEVIATIONS CAN
LEAD TO AN INACCURATE ROCKET PASS
To Next Page
Loading...