Front Panel Configuration
67
7.2 ADJUSTABLE PARAMETERS
7.2.1 MODULE SETTINGS
x Functionality in all DSE4510 & DSE4520 variants
x Functionality in all DSE4520 variants
x Functionality in DSE4510 & DSE4520 current sensing variants only
x Functionality in DSE4510 & DSE4520 RT & RTH variants only
Configuration Parameters – Module (Page 1)
101 Contrast 0 (%)
102 Fast Loading Enabled On (1), Off (0)
103 All Warnings Latched On (1), Off (0)
104 Lamp Test At Startup On (1), Off (0)
105 Power Save Mode Enable On (1), Off (0)
106 Deep Sleep Mode Enable On (1), Off (0)
107 Protected Start Enable On (1), Off (0)
108 Event Log Display Format On (1), Off (0)
109 Power Up Mode 0 (Power Up Mode)
110 DTC String Enable On (1), Off (0)
111 RESERVED
112 Pin Protected Maintenance Reset On (1), Off (0)
113 Stop Button Cooldown On (1), Off (0)
114 Use Module Oil Pressure On (1), Off (0)
115 Use Module Coolant Temp On (1), Off (0)
116 Use Module Engine Hours On (1), Off (0)
117 Use Module RPM On (1), Off (0)
118 Use Module Charge Alt On (1), Off (0)
119 Disable CAN Speed Control On (1), Off (0)
120 CT Position Gen (0), Load(1)
121 Generator Voltage Display On (1), Off (0)
122 Mains Voltage Display On (1), Off (0)
123 Generator Frequency Display On (1), Off (0)
124 Mains Frequency Display On (1), Off (0)
125
Current Display On (1), Off (0)
126 kW Display On (1), Off (0)
127 kVAr Display On (1), Off (0)
128 kVA Display On (1), Off (0)
129 pf Display On (1), Off (0)
130 kWh Display On (1), Off (0)
131 kVArh Display On (1), Off (0)
132 kVAh Display On (1), Off (0)
7.2.2 CAN SETTINGS
Configuration Parameters – Can Application (Page 2)
201 CAN Alternative Engine Speed On (1), Off (0)
202 CAN ECU Data Fail Enable On (1), Off (0)
203 CAN ECU Data Fail Action 0 (Action)
204 CAN ECU Data Fail Delay 0 s
To Next Page
Loading...
