Front Panel Configuration
70
7.2.6 GENERATOR SETTINGS
x Functionality in all DSE4510 & DSE4520 variants
x Functionality in all DSE4520 variants
x Functionality in DSE4510 & DSE4520 current sensing variants only
x Functionality in DSE4510 & DSE4520 RT & RTH variants only
Configuration Parameters – Generator (Page 6)
601 Alternator Fitted On (1), Off (0)
602 Alternator Poles 0
603 Under Voltage Shutdown Enable On (1), Off (0)
604 Under Voltage Trip Shutdown 0 V
605 Under Voltage Warning Enable On (1), Off (0)
606 Under Voltage Warning Trip 0 V
607 RESERVED
608 Loading Voltage 0 V
609 Over Voltage Warning Enable On (1), Off (0)
610 Over Voltage Warning Return 0 V
611 Over Voltage Warning Trip 0 V
612 Over Voltage Shutdown Trip 0 V
613 Under Frequency Shutdown Enable On (1), Off (0)
614 Under Frequency Shutdown Trip 0.0 Hz
615 Under Frequency Warning Enable On (1), Off (0)
616 Under Frequency Warning Trip 0.0 Hz
617 RESERVED
618 Loading Frequency 0.0 Hz
619 Nominal Frequency 0.0 Hz
620 Over Frequency Warning Enable On (1), Off (0)
621 Over Frequency Warning Return 0.0 Hz
622 Over Frequency Warning Trip 0.0 Hz
623 Over Frequency Shutdown Enable On (1), Off (0)
624 Over Frequency Shutdown Trip 0.0 Hz
625 AC System 0 (Ac System)
626 CT Primary 0 A
627 Full Load Rating 0 A
628 Immediate Over Current Enable On (1), Off (0)
629 Delayed Over Current Alarm Enable On (1), Off (0)
630 Delayed Over Current Alarm Action 0 (Action)
631 Over Current Delay Time 0 s
632 Over Current Trip 0 %
633 kW Rating 0 kW
634 Over kW Protection Enable On (1), Off (0)
635 Over kW Protection Action 0 (Action)
636 Over kW Protection Trip 0 %
637 Over kW Protection Trip Delay 0 s
To Next Page
Loading...
