Front Panel Configuration
69
7.2.4 OUTPUT SETTINGS
x Functionality in all DSE4510 & DSE4520 variants
x Functionality in all DSE4520 variants
x Functionality in DSE4510 & DSE4520 current sensing variants only
x Functionality in DSE4510 & DSE4520 RT & RTH variants only
Configuration Parameters – Outputs (Page 4)
401 Digital Output A Source 0 (Output Source)
402 Digital Output A Polarity 0 (Output Polarity)
403 Digital Output B Source 0 (Output Source)
404 Digital Output B Polarity 0 (Output Polarity)
405 Digital Output C Source 0 (Output Source)
406 Digital Output C Polarity 0 (Output Polarity)
407 Digital Output D Source 0 (Output Source)
408 Digital Output D Polarity 0 (Output Polarity)
409 Digital Output E Source 0 (Output Source)
410 Digital Output E Polarity 0 (Output Polarity)
411 Digital Output F Source 0 (Output Source)
412 Digital Output F Polarity 0 (Output Polarity)
7.2.5 TIMER SETTINGS
Configuration Parameters – Timers (Page 5)
501 Mains Transient Delay
502 Start Delay
503 Preheat Timer
504 Crank Time
505 Crank Rest Time
506 Smoke Limiting
507 Smoke Limiting Off
508 Safety On Delay
509 Warm Up Time
510 Return Delay
511 Cooling Time
512 ETS Solenoid Hold
513 Failed To Stop Delay
514 Generator Transient Delay
515 Transfer Time
516 Breaker Trip Pulse
517 Breaker Close Pulse
518 Delayed Load Output 1
519 Delayed Load Output 2
520 Delayed Load Output 3
521 Delayed Load Output 4
522 Power Save Mode Delay
523 Deep Sleep Mode Delay
524 Page Timer
525 Cooling Time at Idle
To Next Page
Loading...
