42. Remote open GB and stop
Pulse command to initiate the GB OFF sequence (de-load + open) followed by the stop sequence (cooling
down + stop).
43. GB close inhibit
When this input is activated, the GB ON sequence will not be initiated.
44. Force analogue LS
Used to force the analogue load sharing line active in a CANshare application.
Refer to the document “Description of options - Option G9” for a detailed description.
45-52. BTB A – BTB D pos. feedback
BTB feedbacks for BTB position supervision and control of LS sections in a CANshare application.
Refer to the document “Description of options - Option G9” for a detailed description.
Configuration
The digital inputs are configured via the PC utility software.
Select the input icon in the horizontal toolbar.
GPC-3 DRH 4189340587 UK Additional functions
DEIF A/S Page 41 of 122
To Next Page
Loading...
