1.1.5 Factory settings
The Multi-line 2 unit is delivered from factory with certain factory settings. These are based on average values
and are not necessarily the correct settings for matching the engine/generator set in question. Precautions
must be taken to check the settings before running the engine/generator set.
1.2 About the designer's reference handbook
1.2.1 General purpose
This Designer's Reference Handbook mainly includes functional descriptions, presentation of display unit and
menu structure, information about the PID controller, the procedure for parameter setup and reference to pa-
rameter lists.
The general purpose of this document is to provide useful overall information about the functionality of the
unit and its applications. This document also offers the user the information he needs in order to successfully
set up the parameters needed in his specific application.
Make sure to read this document before starting to work with the Multi-line 2 unit and the gen-
set to be controlled. Failure to do this could result in human injury or damage to the equip-
ment.
1.2.2 Intended users
This Designer's Reference Handbook is mainly intended for the panel builder designer in charge. On the ba-
sis of this document, the panel builder designer will give the electrician the information he needs in order to
install the Multi-line 2 unit, for example detailed electrical drawings. In some cases, the electrician may use
these installation instructions himself.
1.2.3 Contents and overall structure
This document is divided into chapters, and in order to make the structure simple and easy to use, each
chapter will begin from the top of a new page.
GPC-3 DRH 4189340587 UK General information
DEIF A/S Page 6 of 122
To Next Page
Loading...
Need help?
General
