3.12.1 Parameter access
To gain access to adjust the parameters, the password level must be entered:
If the password level is not entered, it is not possible to enter the parameters.
The customer password can be changed in jump menu 9116. The service password can be
changed in jump menu 9117. The master password can be changed in jump menu 9118.
The factory passwords must be changed if the operator of the genset is not allowed to change
the parameters.
It is not possible to change the password at a higher level than the password entered.
GPC-3 DRH 4189340587 UK Functional descriptions
DEIF A/S Page 23 of 122
To Next Page
Loading...
