Deif GPC-3 Designers Reference Handbook

If “Event” is selected, the log could look like this:
4170 Fuel level
06-24 15:24:10.3
INFO FIRST LAST
G 400 400 400V
The specific alarm or event is shown in the second line. In the example above the fuel level alarm has occur-
red. The third line shows the time stamp.
If the cursor is moved to “INFO”, the actual value can be read when pressing “SEL” :
4170 Fuel level
VALUE 8%
INFO FIRST LAST
G 400 400 400V
The first event in the list will be displayed, if the cursor is placed below “FIRST” and “SEL” is pressed.
The last event in the list will be displayed, if the cursor is placed below “LAST” and “SEL” is pressed.
The and push-buttons are used to navigate in the list.
PC utility software
Using the PC utility software, the entire log stack of the last 150 events can be retrieved by activating the log
button on the horizontal toolbar.
The alarms and events are displayed as indicated below. The actual alarms are displayed in the text column
together with selected measurements.
In the right side column, additional data is indicated. This is specific data for the most important measure-
ments. The data is logged for each specific event and is used for troubleshooting after each alarm.
GPC-3 DRH 4189340587 UK Additional functions
DEIF A/S Page 51 of 122

Deif GPC-3 Specifications

General

Brand	Deif
Model	GPC-3
Category	Controller
Language	English