Dell 5330dn - Workgroup Laser Printer B/W - Printer Quality Settings

Menu
selection:
Purpose: Values:
Resolution Selects printed output
resolution.
600dpi
1200dpi
Draft Mode
Specifies the number of
dots printed per inch (dpi).
The higher the setting, the
sharper the printed
characters and graphics
appear.
If the print jobs are
mostly text, select
600dpi-Normal for
the highest quality
printing.
Select 1200dpi-
Best when your job
contains bitmapped
images, such as
scanned photos or
some graphics, that
will benefit from
enhanced line
screening.
Darkness Lightens or darkens printed
output and conserves
toner.
Normal
Light
Dark
Lighten or darken the print
on the page by changing
the toner density setting.
The Normal setting usually
produces the best result.
Use the Light toner density
setting to save toner.
Finishing
Use this menu selection to define how the printer delivers the printed output.
Menu
selection:
Purpose: Values:
Copies Set the default
number of copies by
selecting any number
from 1 to 999.
1 - 999
Orientation Choose the default
orientation of the
print image on the
page.
Portrait
Landscape
Margin Shift Set the margin of
print materials for
one-sided printing.
Increase or decrease
the value in 0.1 mm
increments.
Top
Margin
[0-250]
Left
Top Margin: Set the top margin,
from 0 to 250 mm.
Left Margin: Set the left
margin, from 0 to 164 mm.