Dell 5330dn - Workgroup Laser Printer B/W - Installing Usb Font Card

Activating the added memory in the printer properties
After installing the memory DIMM, you need to select it in the printer properties of the printer driver so that you can use
it:
Dell 5330dn Mono Laser Printer
1. Click the Windows Start menu.
2. For Windows 2000, select Settings and then Printers.
For Windows XP/Server 2003, select Printers and Faxes.
For Windows Vista/Server 2008 , select Control Panel
Hardware and Sound Printers.
For Windows 7, select Control Panel
Hardware and Sound Devices and Printers.
For Windows Server 2008 R2, select Control Panel
Hardware Devices and Printers.
3. Select the Dell 5330dn Mono Laser Printer.
4. Right-click the printer icon and select Properties.
5. Click the Printer tab and select 768 from the Memory Size drop-down list in the Printer Memory section.
6. Click OK.
Dell 5330dn Mono Laser Printer PS
1. Ensure the PostScript printer driver is installed on your computer. For details about installing the PS printer driver,
see "Installing Software in Windows".
2. Click the Windows Start menu.
3. For Windows 2000, select Settings and then Printers.
For Windows XP/Server 2003, select Printers and Faxes.
For Windows Vista/Server 2008 , select Control Panel Hardware and Sound Printers.
For Windows 7, select Control Panel
Hardware and Sound Devices and Printers.
For Windows Server 2008 R2, select Control Panel
Hardware Devices and Printers.
4. Select the Dell 5330dn Mono Laser Printer PS printer.
5. Right-click the printer icon and select Properties.
6. Click Device Settings.
7. Select 768 MB from the Printer Memory drop-down list in the Installable Option section.
8. Click OK.
Installing USB Font Card
USB font cards can be used to permanently store additional Fonts and forms. This card can be used to enable the printer
to print barcodes and logos. Once the card is installed, the printer automatically detects the additional fonts in the card.