Figure 92. Removing drive backplane
Next step
Install the drive backplane.
Related link
Removing the air shroud
Removing the backplane cover
Removing a drive carrier
Installing the drive backplane
Installing the drive backplane
Prerequisite
Follow the safety guidelines listed in Safety instructions.
NOTE
: The procedure to install the backplane is similar for all backplane congurations.
Steps
1 Use the hooks on the system as guides to align the slots on the backplane with the guides on the system.
2 Lower the drive backplane until the blue release tabs snap into place.
Installing and removing system components
135
To Next Page
Loading...
