Dell EMC PowerEdge R540 - Installing the Front Bezel

Figure 18. Removing the front bezel with the LCD panel
Related link
Installing the front bezel
Installing the front bezel
The procedure to install the front bezel with and without the LCD panel is the same.
Prerequisite
Follow the safety guidelines listed in Safety instructions.
Steps
1 Locate and remove the bezel key.
NOTE
: The bezel key is part of the LCD bezel package.
2 Align and insert the right end of the bezel onto the system.
3 Press the release button and t the left end of the bezel onto the system.
4 Lock the bezel by using the key.
64
Installing and removing system components