Table 41. System setup options—System Management menu(continued)
System Management
Asset Tag Creates a computer Asset Tag that can be used by an IT administrator to uniquely
identify a particular computer.
NOTE: Once set in BIOS, the Asset Tag cannot be changed.
Wake on LAN Enables or disables the computer to turn on by a special LAN signal.
By default, the Wake on LAN option is disabled.
Auto On Time Enable to set the computer to turn on automatically every day or on a preselected
date and time. This option can be configured only if the Auto On Time is set to
Everyday, Weekdays, or Selected Days.
By default, the Auto On Time option is disabled.
Intel AMT Capability
Enable Intel AMT Capability Enables or disables the MEBx in pre-boot menu.
By default, the Restrict Boot Access option is selected.
Enable SERR Messages Enables or disables SERR messages.
By default, the Enable SERR Messages option is enabled.
First Power On Date
Set Ownership Date Allows the user to set the Ownership date..
By default, the Set Ownership Date option is disabled.
DIagnostics
OS Agent Requests Enables the user to configure the Ownership date.
By default, the OS Agent Requests option is enabled.
Power-on Self-Test Attomatic
Recovery
Power-on Self-Test Automatic Recovery Enables or disables the computer to respond before completing the BIOS Power-
on Self-Test (POST).
By default, the Power-on Self-Test Automatic Recovery option is enabled.
Table 42. System setup options—Keyboard menu
Keyboard
Keyboard Errors
Enable Keyboard Error Detection Enables or disables the keyboard error detection.
By default, the Enable Keyboard Error Detection option is enabled.
Numlock LED
Enable Numlock LED Enables or disables Numlock LED.
By default, the Enable Numlock LED option is enabled.
Device Configuration HotKey Access Allows you to control whether you can access device configuration screens
through hotkeys during computer startup.
By default, the Device Configuration HotKey Access option is enabled.
NOTE: This setting controls only the Intel RAID (CTRL+I), MEBX (CTRL+P),
and LSI RAID (CTRL+C) Option ROMs. Other preboot Option ROMs, which
support entry using a key sequence, are not affected by this setting.
130 BIOS Setup
To Next Page
Loading...
Need help?
General