Dell PowerConnect 7048P - Page 1096

1096 Configuring Differentiated Services
Policing Traffic Condition
Follow these steps to perform policing on the packets that match this policy
class:
1
Select Policing from the Traffic Conditioning drop-down menu on the
DiffServ Policy Class Definition page to display the DiffServ Policy -
Policing
page.
Figure 39-12. Policy Class Definition - Policing
The DiffServ Policy - Policing page displays the Policy Name , Class
Name
, and Policing Style .
Select a value for the following fields:
• Color Mode — The type of color policing used: Color Blind or Color
Aware.
•
Conform Action Selector — The action taken on packets that are
considered conforming (below the police rate). Options are Send,
Drop, Mark CoS, Mark IP DSCP, Mark IP Precedence.
•
Violate Action — The action taken on packets that are considered
non-conforming (above the police rate). Options are Send, Drop,
Mark CoS, Mark IP DSCP, Mark IP Precedence.
2 Click Apply .
The policy-class is defined, and the device is updated.