Managing General System Settings 297
Power Over Ethernet Interface Configuration (7024P/7048P Only)
Use the PoE Interface Configuration page
to configure the per-port PoE
settings. From this page, you can also access the PoE Counters table and PoE
Port Table. The PoE Port table allows you to view and configure PoE settings
for multiple ports on the same page.
To display the PoE Interface Configuration
page, click System
→
General
→
Power over Ethernet
→
Interface Configuration in the navigation panel.
Figure 11-21. PoE Interface Configuration
To Next Page
Loading...
