Dell PowerConnect 7048P - Ospfv3 Trap Flags

Configuring SNMP 333
OSPFv3 Trap Flags
The OSPFv3 Trap Flags page is used to specify which OSPFv3 traps you want
to enable or disable. When the condition identified by an active trap is
encountered by the switch, a trap message is sent to any enabled SNMP Trap
Receivers, and a message is written to the trap log.
To access the OSPFv3 Trap Flags page, click Statistics/RMON
→ Trap
Manager
→ OSPFv3 Trap Flags in the navigation panel.
Figure 12-17. OSPFv3 Trap Flags