Dell PowerConnect 7048P - Configuring Green Features

502 Configuring Port Characteristics
Configuring Green Features
Beginning in Privileged EXEC mode, use the following commands to
configure and monitor energy-saving features for the ports and the switch.
CTRL + Z Exit to Privileged EXEC mode.
show link-dependency
[group group_id ]
View link dependency settings for all groups or for the
specified group.
Command Purpose
configure Enter Global Configuration mode.
interface interface Enter interface configuration mode for the specified
interface. The
interface variable includes the interface type
and number, for example gigabitethernet 1/0/3.
You can also specify a range of interfaces with the interface
range command, for example, interface range
gigabitethernet 1/0/8-12 configures interfaces 8, 9, 10, 11,
and 12.
green-mode energy-
detect
Enable low-power idle mode on the interface.
green-mode eee Enable EEE low power idle mode on the interface.
exit Exit to global configuration mode.
green-mode eee-lpi-
history {sampling-
interval
seconds | max-
samples
max }
Configure the global EEE LPI history collection interval
and buffer size.
exit Exit to Privileged EXEC mode.
show green-mode
interface
View green mode settings for the specified port.
show green-mode eee-
lpi-history interface
interface
View the EEE LPI history statistics for the specified port.
Command Purpose