Hardware Overview 93
Module LEDs
The 10GBase-T module has two LEDs per port, the SFP+ module has one
LED per port, and the Stacking/10 GbE module does not have any LEDs.
10 Gigabit Ethernet Port LEDs
Table 3-4 contains LED definitions for 10 GbE ports on the plug-in module
available for PowerConnect 7000 Series switches.
SFP+ Port LEDs
Table 3-5 contains LED definitions for SFP+ port on the plug-in module
available for PowerConnect 7000 Series switches.
Table 3-4. 10 GbE Port LEDs Definitions
LED Color/Activity Definition
LNK (Left) Green solid The port is linked at 10G.
Yellow solid The port is linked at another speed.
Off The port is not linked.
ACT (Right) Green blinking The port is sending and/or receiving network
traffic.
Off The port has no activity.
Table 3-5. SFP+ Port LEDs Definitions
LED Color/Activity Definition
LNK/ACT Green solid The port is linked.
Green blinking The port is sending and/or receiving network
traffic.
Off The port is not linked.
To Next Page
Loading...
