Dell PowerConnect 7048P - Communities

324 Configuring SNMP
Figure 12-8. Add Remote Users
3 Define the relevant fields.
4 Click Apply to update the switch.
Click Show All to view the User Security Model Table, which contains
information about configured Local and Remote Users.
Communities
Access rights for SNMPv1 and SNMPv2 are managed by defining
communities Communities page. When the community names are changed,
access rights are also changed. SNMP Communities are defined only for
SNMP v1 and SNMP v2.
To display the Communities page, click System
→ SNMP → Communities
in the navigation panel.