714 Configuring L2 Multicast Features
Removing a Bridge Multicast Group
To delete a bridge multicast group:
1
Open the
Bridge Multicast Group
page.
2
Select the
VLAN ID
associated with the bridge multicast group to be
removed from the drop-down menu.
The
Bridge Multicast Address
and the assigned ports/LAGs display.
3
Check the
Remove
check box.
4
Click
Apply
.
The selected bridge multicast group is removed, and the device is updated.
Bridge Multicast Forwarding
Use the Bridge Multicast Forwarding page to enable attaching ports or LAGs
to a switch that is attached to a neighboring Multicast switch. Once IGMP
Snooping is enabled, multicast packets are forwarded to the appropriate port
or VLAN.
To display the Bridge Multicast Forwarding page, click Switching
→
Multicast Support
→
Bridge Multicast Forwarding in the navigation menu.
Figure 25-4. Bridge Multicast Forwarding
To Next Page
Loading...
