Dell PowerConnect 7048P - Page 1186

1186 Managing IPv4 and IPv6 Multicast
Figure 42-38. Add SSM Range
3 Click the Add Default SSM Range check box to add the default SSM
Range. The default SSM Range is 232.0.0.0/8 for IPv4 multicast and
ff3x::/32 for IPv6 multicast.
4 Enter the SSM Group IP Address.
5
Enter the SSM Group Mask (IPv4) or SSM Prefix Length (IPv6).
6 Click Apply .
The new SSM Range is added, and the device is updated.