1214 Managing IPv4 and IPv6 Multicast
7
Configure VLAN 20 as a VLAN routing interface and specify the OSPF
area.
console(config)#interface vlan 20
console(config-if-vlan20)#ip address 192.168.20.4
255.255.255.0
console(config-if-vlan20)#ip ospf area 0
8
Enable IGMPv2 and PIM-SM on the VLAN routing interface.
console(config-if-vlan20)#ip igmp
console(config-if-vlan10)#ip igmp version 2
console(config-if-vlan20)#ip pim
console(config-if-vlan20)#exit
9
Globally enable IGMP snooping, IP multicast, IGMP, and PIM-SM on the
switch.
console(config)#ip igmp snooping
console(config)#ip multicast
console(config)#ip igmp
console(config)#ip pim sparse
10
Configure VLAN 10 as the RP and specify the range of multicast groups
for PIM-SM to control.
console(config)#ip pim rp-address 192.168.10.4
225.0.0.0 240.0.0.0
To Next Page
Loading...
