Controlling Management Access 185
myList. The switch will contact the RADIUS server to authenticate the
user. If that attempt fails, the switch queries the local user database for
relevant authentication information.
Figure 9-9. Configure Authentication Profile
5
Click
Apply
.
A profile is created. You can apply the newly created authentication profile
to an access method by using the
System
→
Management Security
→
Select Authentication
page.
For example, you can select myList as the login authentication for anyone
who connects to the switch by using Telnet.
NOTE: To use the LINE or ENABLE method, you must first define passwords
for these methods. For more information, see "Line Password" on page 194 or
"Enable Password" on page 194.
To Next Page
Loading...
