Dell PowerConnect 7048P - Page 201

Controlling Management Access 201
Adding and Configuring RADIUS Accounting Server Information
To add a RADIUS accounting server:
1
Open the RADIUS Accounting Server Configuration page.
2 Click Add to display the Add RADIUS Accounting Server page.
3 Specify the IP address of the RADIUS accounting server.
4 Use the default RADIUS server name or enter up to 32 alphanumeric
characters. Spaces, hyphens, and underscores are also permitted.
You can use the same name for multiple RADIUS accounting servers.
RADIUS clients can use RADIUS accounting servers with the same name
as backups for each other.
Figure 9-27. Add RADIUS Accounting Server
5 Click Apply .
6 Click RADIUS Accounting Server Configuration to return to the main
page and configure additional information about the RADIUS accounting
server.
7 If more than one server has been added, select the IP address of the
RADIUS accounting server to configure.
8 To configure a shared secret, select the Apply check box and enter the text
in the
Secret field.
9 Click Apply .
10 To view or remove a RADIUS accounting server configured on the switch,
click
Show All .