Dell PowerConnect 7048P - Page 758

758 Configuring L2 Multicast Features
Figure 25-37. Switch with MVR
To configure the switch:
1
Create VLANs 10, 20, and 99.
console#configure
console(config)#vlan database
console(config-vlan)#vlan 10,20,99
console(config-vlan)#exit
2
Configure ports 1 and 2 as members of VLAN 10.
console(config)#interface range gi1/0/1-2
console(config-if)#switchport access vlan 10
console(config-if)#exit
3
Configure ports 8 and 9 as members of VLAN 20.
console(config)#interface range gi1/0/8-9
console(config-if)#switchport access vlan 20
console(config-if)#exit
4
Configure port 24 as a member of VLAN 99.
console(config)#interface gigabitethernet 1/0/24
console(config-if-Gi1/0/24)#switchport mode trunk
`
Port 1
RP
VLAN 10
Video Server
PowerConnect Switch
`
`
Port 2
RP
Port 8
RP
Port 24
SP
`
Port 9
RP
VLAN 20
VLAN 99
(MVR VLAN)