2. Disconnect all other cables from the system board.
CAUTION: Do not to damage the system identification button while removing the system board from the
chassis.
3. Grasp the system board holder, lift the blue release pin, slide the system board toward the front of the system, and lift the
system board out of the chassis.
CAUTION: Do not lift the system board by holding a memory module, processor, or other components.
Figure 95. Removing the system board
a. system board holder
b. system board
c. release pin
Related references
Safety instructions
Related tasks
Before working inside your system
Removing the cooling shroud
Removing memory modules
Installing and removing system components
147
To Next Page
Loading...
