PERC9
The Dell
™
PowerEdge
™
Expandable RAID Controller (PERC) 9 is a refresh of Dell PERC portfolio in support of Dell’s 13G
PowerEdge servers, encompassing both hardware changes and firmware updates, while continuing support SAS, SATA and Solid
State Drive (SSD) devices internal to Dell PowerEdge servers. The PERC9 series of cards consist of the H330, H730, H730P,
and H830 cards.
NOTE: This is an overview of PERC9. For a full technology training on PERC9, please refer to the reference material link
below.
Internal Link: PERC9
External Link: PERC9
PERC H330
The PERC H330 is a general purpose RAID solution card. The card is available in Adapter (low profile and full height), Mini
Modular, and Mini Monolithic form factors for internal storage and tape devices.
PERC H730
The PERC H730 is a RAID solution card consisting of 512MB or 1GB Non-Volatile Cache and is available in the Adapter (low
profile and full height), Mini Modular, and Mini Monolithic form factors for internal storage.
PERC H730P
The PERC H730P is the performance RAID solution card consisting of 1GB or 2GB Non-Volatile Cache and is available in the
Adapter (low profile and full height), Mini Modular, and Mini Monolithic form factors for internal storage.
PERC H830
The PERC H830 is similar to the H730P solution, except that it supports external storage. The PERC H830 is only available in
the Adapter (low profile and full height) form factor.
Power Supplies
Energy Smart power supplies have intelligent features, such as the ability to dynamically optimize efficiency while maintaining
availability and redundancy. Also featured are enhanced power- consumption reduction technologies, such as high- efficiency
power conversion and advanced thermal-management techniques, and embedded power-management features, including high-
accuracy power monitoring.
NOTE:
For more information on PSU firmware update, please refer to reference material link below.
Internal Link: Dell PowerEdge 12G and 13G Power Supply Unit Firmware Update
External Link: Dell PowerEdge 12G and 13G Power Supply Unit Firmware Update
The following power supply unit options are available for the R630:
● 495 W AC
● 750 W AC
● 1100 W AC
● 1100 W DC
NOTE: A 750 W AC/DC Mixed Mode power supply is available in China only.
166 Technology and Components
To Next Page
Loading...
