Front bezel (optional)
The front bezel is attached to the front side of the system and prevents accidents while removing the hard drive or when
pressing the reset or power button. The front bezel can also be locked for additional security.
Removing the optional front bezel
Follow the safety guidelines listed in the Safety instructions section.
1. Locate and remove the bezel key.
NOTE: The bezel key is attached to the back of the bezel.
2. Unlock the bezel by using the key.
3. Slide the release latch up, and pull the left end of the bezel.
4. Unhook the right end, and remove the bezel.
Figure 16. Removing the optional front bezel
a. bezel lock
b. front bezel
Installing and removing system components
71
To Next Page
Loading...
